Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
AEG Lavamat Washing Machine Error codes
These error code explanations can help you diagnose a problem with your AEG Lavamat Washing Machine.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
C0
Pressure switch fault
- Issue:
- Imbalance between both washing machine Pressure Switches.
- Water heater or wiring fault
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C1
No water intake
- Issue:
- No water in, valve at fault or low pressure
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C2
Drain pump blockage
- Issue:
- Drain pump open circuit
- Water drainage blocked. Pump blockage, Pump open circuit, Drain blockage
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C3
Safety flood device or switch operated
- Issue:
- Drain pump fault
- Electronic module fault
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C4
Wash pump faulty
- Issue:
- Water drain pump faulty
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C5
Overheat sensor on main motor activated
- Issue:
- Main drive motor faulty
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C6
Pressure switch fault
- Issue:
- Water level switch or sensor faulty
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
C7
Heater or heater relay fault
- Issue:
- Heater or heater relay fault
- Advice:
- Check heater for continuity
- Check module
C8
NTC temperature sensor fault detected
- Issue:
- NTC temperature sensor fault detected
- Advice:
- Check NTC for short or open circuit
- Check wiring
- Check module
C9
Motor tacho fault
- Issue:
- Motor tacho fault
- Advice:
- Check main drive motor
- Check tacho magnet
- Check tacho coil
- Check module
CA
MOS-FET transistor for motor triac on main board defective
- Issue:
- Motor triac on main board defective (Replace main module)
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
CB
Overfill or level fault
- Issue:
- Overfill or level fault
- Advice:
- Check level switch or sensor
- Check water inlet valve
CC
PTC for MOS-FET transistor fault
- Issue:
- PTC for MOS-FET transistor fault, main motor fault, replace motor
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
CD
Door interlock fault
- Issue:
- Door interlock fault
- Advice:
- Check wiring
- Check washing machine door lock
- Check door latch etc.
CF
Checksum EEPROM failure
- Issue:
- Configuration error on module, replace electronic control module
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Washing Machine Repairs in London.
Arrange a visit from a Washing Machine engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
