Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Anonymous User
  Wednesday, 09 August 2017
  21 Replies
  352K Visits
0
Votes
Undo
  Subscribe
How to clear LG Dryer error codes D80 D90 D95?
Rate this post:
7 years ago
·
#346
Accepted Answer
0
Votes
Undo
LG Dryer Error Codes – D80 D90 D95 – How To Clear Error Code

Use the error code that displays to troubleshoot and fix the dryer yourself. The troubleshooting methods below also pertain to the “Flowsense” error light.

NOTE: When the d80, d90, or the d95 fault code shows on the LG dryer, the dryer will shut off after two minutes and the dryer will emit an audible sound repeatedly.

HOW TO TROUBLESHOOT LG DRYER D80, D90, D95 ERROR CODES
– Disconnect the dryer exhaust vent hose on the back of the dryer.

– Add a load of wet clothes to the dryer and run a cycle.

– If the clothes dry in the normal time range then the issue is in the exhaust system.

– If the clothes are still wet, the dryer may have a bad heat element or bad thermal fuse.

LG DRYER ERROR CODE d80
The LG Dryer error code d80 indicates an 80% air blockage. This means the clothes dryer’s air exhaust is not pushing enough air out of the dryer through the venting to the outside of your home or apartment. The d80 error means the dryer is 80% clogged either in the air exhaust hose, wall ducts, or the vent outside.

– Check to be sure the lint filter is clean.

– Check the exhaust hose connected to the back of the dryer is not clogged or blocked by lint.

– Check the wall duct to be sure there is not a large lint blockage in the wall and preventing airflow.

– Check the outside vent to be sure lint has not built up to the point that air cannot flow properly.

NOTE: The outside air vent that lets out the dryer’s heat exhaust may be on the roof or on the side of your home.

LG DRYER ERROR CODE d90
The LG Dryer error code d90 indicates an 90% air blockage. This means the clothes dryer’s air exhaust is not pushing enough air out of the dryer through the venting to the outside of your home or apartment. The d90 error means the dryer is 90% clogged either in the air exhaust hose, wall ducts, or the vent outside.

– Check to be sure the lint filter is clean.

– Check the exhaust hose connected to the back of the dryer is not clogged or blocked by lint.

– Check the wall duct to be sure there is not a large lint blockage in the wall and preventing airflow.

– Check the outside vent to be sure lint has not built up to the point that air cannot flow properly.

NOTE: The outside air vent that lets out the dryer’s heat exhaust may be on the roof or on the side of your home.

LG DRYER ERROR CODE d95
The LG Dryer error code d95 indicates an 95% air blockage. This means the clothes dryer’s air exhaust is not pushing enough air out of the dryer through the venting to the outside of your home or apartment. The d95 error means the dryer is 95% clogged either in the air exhaust hose, wall ducts, or the vent outside.

– Check to be sure the lint filter is clean.

– Check the exhaust hose connected to the back of the dryer is not clogged or blocked by lint.

– Check the wall duct to be sure there is not a large lint blockage in the wall and preventing airflow.

– Check the outside vent to be sure lint has not built up to the point that air cannot flow properly.

NOTE: The outside air vent that lets out the dryer’s heat exhaust may be on the roof or on the side of your home.
1 year ago
·
#3382
0
Votes
Undo
How to clear LG Dryer error codes D80 D90 D95?
if you have a new unit and no clogs, you need to see if your dryer vent run is greater than 35 feet. Every 90 degree turn in the exhaust pipe removes 5 feet and every 45 degree removes 2.5 feet. Newer appliances have tighter tolerances and will not function properly if the run is too long. Have an LG system here had the same d80 issue. Added new outlet via the roof instead of the longer run that was there in the crawl space and this issue was resolved. See below article. https://waypointinspection.com/dryer-vent-safety/#:~:text=How%20Long%20Should%20A%20Dryer,feet%20in%20total%20allotted%20length.
  • Page :
  • 1
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
1 year ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
1 year ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...