Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
F0
Default F code-no failure
- Issue:
- The F0 code displays if there are no previous fault codes and you hold the CANCEL key for 5 seconds. Press CANCEL to clear the display.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F1
Defective electronic oven control (EOC)
- Issue:
- Disconnect power or unplug the wall oven. Replace the electronic oven control (EOC).
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F2/E0
Keypad wire harness is disconnected
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F2/E5 or F2/E6
CANCEL key is defective
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F3/E0
CANCEL key is defective
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the keypad wire harness if loose. Restore electrical power to the wall oven and press CANCEL. If the error code returns after 60 seconds, replace the keypad. If the problem persists, replace the electronic oven control.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F3/E0
Oven temperature sensor defective or an open oven temperature sensor circuit
- Issue:
- Disconnect power or unplug the wall ovenF. Reconnect the oven temperature sensor wire harness connection if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F3/E1
Oven temperature sensor defective or a shorted oven temperature circuit.
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire harness if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F3/E2
Oven temperature is more than over 575 degrees F in BAKE mode.
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire if loose. Replace the wire harness if damaged Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F3/E3
Oven temperature is too more than 950 degrees F in CLEAN mode
- Issue:
- Disconnect power or unplug the wall oven. Reconnect the oven temperature sensor wire if loose. Replace the wire harness if damaged. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC).
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F4/E1
Meat probe malfunction – shorted
- Issue:
- Disconnect power or unplug the wall oven. Unplug the meat probe and measure the resistance of the meat probe using a volt/ohm meter. If the resistance isn't 59000 ohms at room temperature, replace the meat probe. If the resistance of the meat probe is okay, insert the meat probe in the jack and check for a firm connection between the probe and jack in the oven. If the jack is damaged or worn out, replace it. Reconnect the wire harness connection on the meat probe jack if loose. Replace the wire harness if damaged.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F5/E0
Door is open, but latch is locked (door switch communicates an open door, but latch switch communicates a locked door)
- Issue:
- Test the oven door switch operation using the oven light. Open and close the oven door to see if the oven door switch turns the oven light on and off when the oven door is opened and closed. If the oven door switch is defective, replace it. Disconnect power or unplug the oven. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Check the door lock assembly for visible damage and replace it if broken.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
F5/E1
Self-clean latch won’t lock/unlock
- Issue:
- Disconnect power or unplug the wall oven. Reconnect any loose wires on the oven door lock assembly wire harness. Replace the wire harness if damaged. Check the door lock assembly for visible damage and replace it if broken.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Whirlpool Oven Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
