Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Smeg Cookers With An Induction Hob Error codes
These error code explanations can help you diagnose a problem with your Smeg Cookers With An Induction Hob.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
-
Knob error
- Issue:
- Knob continuously working or broken cable
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Er03
Continuous use of the buttons; the control unit switches off after 10s
- Issue:
- Water or pots on the glas of the hob, on the control unit
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Er20
Flash Error
- Issue:
- uC- faulty
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Er22
the control unit switches off after 3,5 - 7,5 sec
- Issue:
- Short circut or key recognistion disconnected
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Er31
Wrong configuration - Faulty connection between controls and induction board
- Issue:
- induction system not configured. It has been fitted a wrong control board. Faulty filter board.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Er47
Connection error between the controls and the inductor
- Issue:
- Faulty controls - Faulty or disconnected control board connection cable. Faulty filter board.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
E / 2
The tempreture probe notices an overheating of the induction plate
- Issue:
- The cooking zone has been excessively overheated
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
E / 5
Error filter board
- Issue:
- Faulty filter board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
E / 6
Supply voltage problem - Power board
- Issue:
- Lack of the L2 phase - Power board faulty (PCB)
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
E / 7
Error of inner connection
- Issue:
- Error of inner connection
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
E / 9
Faulty tempreture probe
- Issue:
- Mechanic defect or ohmic variation of the heating element
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
U400
Overvoltage
- Issue:
- Appliance wrongly connected at 400V
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Smeg Hob Repairs in London.
Fixed Price Smeg Repairs
Getting a fixed price Repair for your Smeg in your local area couldn’t be easier. Rest assured, we have a local network of fully trained appliance engineers able to Repair your appliance.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
