Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Gaggenau Hob Error Codes
These error code explanations can help you diagnose a problem with your Gaggenau Hob.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
U400
The hob is connected incorrectly.
- Issue:
- Disconnect the appliance from the mains using thehousehold fuse or the circuit breaker in the fusebox.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
E
E flashes in a cooking zone display
- Issue:
- The control panel is very dirty, food has spilt over orthere is an object on the control panel. Wipe thecontrol panel thoroughly or remove the object.Touch the appropriate control panel. The flashingstops.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
E
E flashes in all the cooking zone indicators and asignal sounds
- Issue:
- The main switch was touched continuously for morethan 5 seconds or there is an object on the mainswitch. Wipe the control panel thoroughly orremove the object. Switch the hob back on.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
Er
Er display and numbers
- Issue:
- If an Er and numbers appear in the display, there isa fault with the electronics. Switch the hob off andon again using the household fuse or the circuitbreaker in the fuse box. Call the after-sales serviceif the display appears again.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F0
An internal error was produced while the hob was working
- Issue:
- …
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F1
F1 display
- Issue:
- A cooking zone has faulty electronics.Switch the cooktop off and, after a few minutes, onagain using the household fuse or the circuitbreaker in the fuse box (reset). Disconnect thecooktop from the electricity and call the after-salesservice if the display appears again.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F2
F2 display
- Issue:
- The hob is too hot and has switched itself off.Remove the pans from the cooking zones. F2disappears from the display when the indicator isacknowledged (by touching any control panel) andwhen the cooking zones have cooled sufficiently.Wait a few minutes until the cooking zones havecooled down slightly. If F2 appears again after thecooking zones are switched back on, the hob is stilltoo hot. Switch off the cooking zones and allow tocool further.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F3
…
- Issue:
- …
- Advice:
- …
F4
F4 display
- Issue:
- The control panel is too hot and the hob hasswitched itself off. Check whether there is a hotpan on the control panel.Remove the pan from the control panel. Wait a fewminutes until the control panel has cooled downslightly. If F4 appears again after the cooking zonesare switched back on, call the after-sales service.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F5
…
- Issue:
- …
- Advice:
- …
F6
…
- Issue:
- …
- Advice:
- …
F7
F7 display
- Issue:
- Frying sensor faultyConfirm the error message by touching any key. Youcan continue cooking without the frying sensor function.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F8
F8 display
- Issue:
- A cooking zone has been in constant operation fortoo long. The holiday safeguard was activated.Switch off the cooking zone. It can be switched onagain immediately.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F9
…
- Issue:
- …
- Advice:
- …
K and 7
Alternating K and 7 display
- Issue:
- A cooking zone which is set on level 8 or 9 is toohot. This cooking zone is reduced to level 7. WhenK disappears you can select a higher setting again.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
K
K display
- Issue:
- The cooktop is too hot and has switched itself off.Remove the pots from the cooking zones.K disappears from the display when the cookingzones have cooled sufficiently.Wait a few minutes until the cooking zones havecooled down slightly. If K appears again after thecooking zones are switched back on, the cooktop isstill too hot. Switch off the cooking zones and allowto cool further.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
…
The cooktop has switched itself off
- Issue:
- The main switch was touched accidentally. Switchthe cooktop back on.A cooking zone has been in constant operation fortoo long. The safety deactivation was activated.Switch off the cooking zone. It can be switched onagain immediately.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
o1
The power voltage is too low
- Issue:
- …
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
o2 o3
The cooking zone has overheated
- Issue:
- …
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
EÖ + number
Electronic system Electronic system
- Issue:
- Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
p + number
Electronic system Electronic system
- Issue:
- Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
F0 F9
There is an internal function error.
- Issue:
- Disconnect the hob from the power supply. Wait a few seconds before reconnecting it. If the indication persists contact the Technical Assistance Service.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
t
The electronic system has overheated and the corresponding hotplate has switched off.
- Issue:
- Wait until the electronic system has cooled down properly, then press any symbol on the hob. If the indication persists contact the Technical Assistance Service.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
{b
Incorrect input voltage, not within the normal working limits.
- Issue:
- Incorrect input voltage, not within the normal working limits. Contact the electricity distributor.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
{c {d
The hotplate has overheated and switched off to protect the countertop.
- Issue:
- Wait until the electronic system has cooled down and then switch it on again.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
"§ + number
Electronic system malfunction.
- Issue:
- Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
š + number
Electronic system malfunction.
- Issue:
- Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
¡ + number
Electronic system malfunction.
- Issue:
- Unplug the hob from the mains. Wait for 30 seconds and switch iton again. *If the warning persists, contact the technical assistanceservice.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
"‹ / "Š
There is an internal error in the operation.
- Issue:
- Unplug the hob from the mains. Wait about 30 seconds beforeplugging it in again. *
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
•
The electronic system has overheatedand the corresponding hotplate hasbeen switched off.
- Issue:
- Wait until the electronic system has cooled down completely.Then push any symbol on the hob.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
"...
The electronic system has overheatedand all hotplates have been switched off.
- Issue:
- Wait until the electronic system has cooled down completely.Then push any symbol on the hob.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
—‚
Supply voltage outside normal operatinglimits.
- Issue:
- Please contact your local electricity company.
- Advice:
—ƒ / —„
The hotplate has overheated and hasswitched off in order to protect its cooking surface.
- Issue:
- Wait until the electronic system has cooled down sufficientlybefore switching it back on
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Gaggenau Appliance Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
