Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Haier Dryer HDY Model Error Codes
These error code explanations can help you diagnose a problem with your Haier Dryer HDY Model.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
E1
Door is open
- Issue:
- Close the dryer door if open. If the door is closed when the code is displayed, unplug the dryer and reconnect the wire harness on the door switch. Replace the wire harness if damaged. If the wire harness is okay, replace the door switch.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Haier Tumble Dryer Repairs in London.
E2
Not heating
- Issue:
- If the dryer actually doesn’t heat, unplug the dryer and replace any defective heating system components. If the dryer does heat, measure the temperature sensor resistance using a volt/ohm meter. If the resistance isn't 10K ohms at 72 degrees F, replace the temperature sensor.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Haier Tumble Dryer Repairs in London.
E3
Load is wet at end of cycle
- Issue:
- If the dryer doesn’t heat, unplug the dryer and replace any defective heating system components. If the dryer heats, clean the lint screen because decreased air flow due to a clogged lint screen prevents the load from drying. Clear the exhaust vent duct system of clogs.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Haier Tumble Dryer Repairs in London.
E5
Temperature sensor is defective
- Issue:
- Unplug the dryer and measure the temperature sensor resistance using a volt/ohm meter. If the resistance isn't 10K ohms at 72 degrees F, replace the temperature sensor.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Haier Tumble Dryer Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.
