Domestic Appliance Forum

Important Whirlpool Washing machine Error Code Fast Fix: Press the PAUSE or CANCEL button twice and the POWER button once to clear an error code.

Whirlpool washing machine Error Code = Sud or Sd
What Does The Error Code Mean? = There excess suds in the washing machine.
-The washer cannot spin out water with excess suds.
-When “Sud” or “Sd” is displayed, the washer automatically extends the rinsing time to remove the excess suds issue.
-The washer pauses the tumbling and adds water for additional rinsing to remove the SUDS.
-The pausing lets the bubbles in the SUDS to break up and remove the error code.
-The pause and rinse may happen several times to remove the suds.
-NOTE: The Sud or Sd error code can also be a restricted drain hose or standpipe.
-Make sure that the drain hose is not clogged. Drain Hose Clogged?

Whirlpool Washing machine Error Code = F7 E1
What Does The Error Code Mean? = This code shows a motor speed sensing error.
-The motor cannot get to the correct speed for the wash cycle selection.
-Check that the shipping bolts have been removed from the washer in all areas.
-Be sure the Whirlpool washer has not been overloaded with too much clothing.
-Press the PAUSE or CANCEL button twice and the POWER button once to clear the code.

Whirlpool washing machine Error Code = F5 E2
What Does The Error Code Mean? = The washer door is not locking as designed.
-Make sure no items blocking the door.
-Press the PAUSE or CANCEL button twice and the POWER button once to clear the F5 E2 error code.

Whirlpool washing machine Error Code = F8 E1 or LO FL
What Does The Error Code Mean? = The washer senses a low flowing of water.
-Check that both the cold and the hot water valves are fully open to the washer.
-Make sure the home water supply is turned on.
-Check the 2 water inlet hoses behind the washer to be sure they are not bent or clogged.
-Press the PAUSE or CANCEL button twice and the POWER button once to clear the code.

Whirlpool washing machine Error Code = F8 E2
What Does The Error Code Mean? = This indicates there is a problem with the Cleaning Dispenser System.
-Be sure the detergent drawer is not full of older caked on detergent.

Whirlpool washing machine Error Code = F9 E1
What Does The Error Code Mean? = This error code indicates that drain times are longer than expected.
-Check that the drain hose is not clogged.
-Excessive SUDS can also cause delays in draining.
-Make sure you are using the correct HE detergent.

Whirlpool washing machine Error Code = Other F# E# code
What Does The Error Code Mean? = Power Issue or Computer Board Problem
-Unplug the washing machine for 5 minutes and reconnect it again to try and RESET the main board.

Whirlpool washing machine Error Code = dET
What Does The Error Code Mean? = The detergent dispenser cartridge not detected in the dispenser.
-Make sure the dispenser cartridge is inserted properly and the dispenser drawer is completely closed.

Whirlpool washing machine Error Code = Int
What Does The Error Code Mean? = The cycle was paused or canceled.
-The washer may take 20 to 30 minutes to stop spinning and draining.
-The error code INT will display during this time.
-Press PAUSE or CANCEL button twice and the POWER button once.
-If the code is still showing then unplug the washer for 5 minutes.

Whirlpool washing machine Error Code = rL or F34
What Does The Error Code Mean? = Misc items were seen in the washer during the Clean Washer cycle.
-Remove the items from the washer drum and restart the Clean Washer cycle.