Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Monday, 14 January 2019
  0 Replies
  1.3K Visits
0
Votes
Undo
  Subscribe
I have Indesit IDS105UK slimline dishwasher....the following fault has occurred.

1. On start up machine pumps out water then allows water into machine after about 2 mins water pumps out and green led lights 1 and 3 flash.

2. Have thought cleaned all pipework checked and cleaned pump....all filters and hoses inside machine.

3. The turbo unit seems to have a build up of scale so cleaned out with soda crystals.

4. Have checked to anti flood device and that is working.

Machine worked first time after cleaning but subsequently has developed the fault again. If you re start the machine several afters after the fault lights flashing it eventually works but does not seem to be working through the cycle.

I have tried several forums but none seem to show lights 1&3 flashing as the error code.

Machine is well maintained and am reluctant to buy a new one unless I know that this one is beyond economical repair.

Any suggestions would be welcome.

Many thanks
Rate this post:
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Online
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
8 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
8 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...