Monday - Friday: 09:00 - 18:00, Saturday: 09:00 - 17:00
  Saturday, 30 May 2020
  0 Replies
  581 Visits
0
Votes
Undo
  Subscribe
We have a De Dietrich DOD 788X pyrolytic double oven. The main oven stopped heating a couple of weeks ago in Circulating heat mode (element at back of the oven heats in this mode) and on removing the element at the back we found that it had literally melted and bits of it were scattered on the bottom of the oven. We replaced the element and the oven worked for about a week and then stopped working (fan works but no heat). We thought it was probably a bad element and replaced it but again no heat. We swapped the temperature probe between the top and bottom oven to see if that was the cause but still no joy. We can get the elements on the top and bottom of the main over to work (using the combined heat mode), but the element at the back won’t work (circulating heat mode). The fan seems to be working OK in the main oven

The oven is 10 years old, is it worth repairing and what else could be causing the problem, a relay switch on the circuit board?
Rate this post:
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.

Ask a Question

Support is currently Offline
Official support hours:
Monday To Friday
From 9:00AM To 6:00PM

My Account

Remember Me

Register for an online account and you'll be able to:

  • Log in at any time 24/7
  • Book an appointment quickly because we already have your details
  • View & pay your invoices instantly
  • Set up & manage Direct Debits
  • View your statement of account

Latest Replies

RE: beeping noise from hoover next washing machine
8 months ago
Quoted from Guest on Thursday, 02 May 2019 my hoover next washing machine has started beeping during a wash. still washes still spins and finishes load I have solved my beeping. Like...
RE: I have an error code C11 C21 C32 on my bosch oven HB13B251B
8 months ago
So had the issue with my oven this morning, for my type I needed to change c 5 0 to c 5 2 . Press and hold the clock for about 4 seconds to get in the the c code area - press the clock to move bet...