Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Error codes for Zanussi Tumble Dryer
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
E00
No alarm.
- Issue:
- No alarm
- Advice:
E21
Canister fill pump triac faulty.
- Issue:
- Wiring faulty; Electronic board faulty. Cycle interrupted. OFF
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E22
Triac “sensing” circuit for the canister fill pump faulty
- Issue:
- Electronic board faulty. Cycle interrupted.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E31
Conductimetric sensor signal frequency too high.
- Issue:
- Electronic board faulty.
- Advice:
- Alarm activated only during diagnostics.
E32
Conductimetric sensor signal frequency too low.
- Issue:
- Wiring faulty; Brushes worn/faulty; Electronic board faulty.
- Advice:
- Cycle interrupted.
E33
It is displayed in the last alarm, if position 8 is NOT OK.
- Issue:
- Wiring faulty; Brushes worn/faulty; Electronic board faulty.
- Advice:
- Alarm activated only during diagnostics.
E45
Door closure sensor.
- Issue:
- Door interlock faulty; Wiring faulty; Electronic board faulty.
- Advice:
- Cycle interrupted.
E51
Motor power triac short-circuited.
- Issue:
- Motor faulty; Wiring faulty; Electronic board faulty.
- Advice:
- Cycle interrupted.
E52
Intervention of motor overheating safety cut-out.
- Issue:
- Motor faulty; Intervention of motor overheating cutout; Wiring faulty; Electronic board faulty.
- Advice:
- Power to the heater unit and reversal of the direction of rotation are interrupted. If the problem does not re-occur, the alarm is memorized and the cycle continues. If the fault persists after several attempts to supply power (about 35 min.), alarm E51 is generated.
E53
Motor triac “sensing” circuit faulty.
- Issue:
- Electronic board faulty.
- Advice:
- Cycle interrupted.
E54
Motor in-operational.
- Issue:
- Excessive wash load; Voltage too low; Motor/transmission system inoperative.
- Advice:
- Cycle paused after several attempts at powering the motor.
E61
Insufficient heating (maximum time exceeded).
- Issue:
- Heater unit faulty; Wiring faulty; NTC sensor incorrectly calibrated/out of position; Electronic board faulty.
- Advice:
- Cycle paused.
E62
Power relay to heater unit faulty.
- Issue:
- Heater unit faulty; Wiring faulty; Electronic board faulty.
- Advice:
- Forced cooling cycle.
E63
Intervention of auto-reset thermostat on the heater unit.
- Issue:
- Thermostat faulty (replace heater unit); Heater unit faulty; Wiring faulty; Electronic board faulty.
- Advice:
- Disconnects the power supply to the heater unit. If the problem does not re-occur, the alarm is memorized and the cycle continues. If, after several attempts to restore power, the fault persists, alarm E62 is generated.
E64
Heater thermostat.
- Issue:
- Heater thermostat faulty: Wiring faulty; Electronic board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E65
Fan motor triac faulty.
- Issue:
- Fan motor wiring not connected; Motor faulty; Triac interrupted.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E66
Fan motor thermal protection.
- Issue:
- Fan motor wiring not connected; Motor faulty; Triac interrupted.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E67
Triac control faulty.
- Issue:
- Fan motor wiring not connected; CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E71
NTC1 sensor faulty.
- Issue:
- NTC1 sensor faulty; Wiring faulty; Electronic board faulty.
- Advice:
- Forced cooling cycle.
E72
NTC2 sensor faulty.
- Issue:
- NTC2 sensor faulty; Wiring faulty; Electronic board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E82
Selector in OFF position faulty.
- Issue:
- Board wiring; board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E83
Selector positions wrong.
- Issue:
- Board wiring; board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E93
Error in the configuration of the appliance.
- Issue:
- EEPROM configuration incorrect. Electronic board faulty. Cycle interrupted. OFF
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
E94
Error in the configuration of the drying cycle. EEPROM configuration incorrect.
- Issue:
- Electronic board faulty.
- Advice:
- Cycle interrupted.
E97
Incongruence between selector and cycles.
- Issue:
- Configuration error.
- Advice:
- Cycle interrupted.
EA1
CRM board communication faulty.
- Issue:
- Board wiring; CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EA2
CRM board protocol inconsistent.
- Issue:
- Software wrong; CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EA3
Board selector faulty.
- Issue:
- Electronic board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EA4
Selector protocol wrong. Electronic board faulty.
- Issue:
- Selector protocol wrong. Electronic board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EB1
Power frequency to appliance out of limits.
- Issue:
- Problems with the power supply (incorrect/interference). Electronic board faulty.
- Advice:
- Cycle interrupted. If a stable power supply is restored before the time-out has elapsed, the cycle resumes.
EB2
Power voltage too high.
- Issue:
- Problems with the power supply (incorrect/interference). Electronic board faulty.
- Advice:
- Cycle interrupted.
EB3
Power voltage too low.
- Issue:
- Problems with the power supply (incorrect/interference). Electronic board faulty.
- Advice:
- Cycle interrupted. If a stable power supply is restored before the time-out has elapsed, the cycle resumes.
EC1
Voltage incongruence between boards.
- Issue:
- Problems with the power supply (incorrect/interference). CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC2
Frequency incongruence between boards.
- Issue:
- Problems with the power supply (incorrect/interference). CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC3
CRM resistance out of time (only in diagnostic mode).
- Issue:
- CRM group not connected; CRM group faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC4
Steam generator (CRM) heater relay.
- Issue:
- CRM group not connected; relay on board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC5
CRM thermostat faulty.
- Issue:
- CRM group not connected; CRM group faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC6
CRM piloting faulty.
- Issue:
- CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC7
CRM pump triac.
- Issue:
- Pump wiring not connected; pump faulty; Triac faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC8
CRM pump diode.
- Issue:
- Diode on wiring short-circuited.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
EC9
CRM pump piloting faulty. CRM board faulty.
- Issue:
- CRM pump piloting faulty. CRM board faulty.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
ECA
Water tank empty.
- Issue:
- Tank level sensor wiring; tank level sensor faulty; water tube obstructed.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Zanussi Tumble Dryer Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.