F0

No fault regisered

Issue:

No fault regisered

Advice:

...

F01

Water/heating NTC or leads short-circuited

Issue:

Water/heating NTC or leads short-circuited. NTC sensor short-circuited water / heating.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F02

Water/heating NTC or leads open-circuited

Issue:

Water/heating NTC or leads open-circuited. NTC sensor open-circuited water / heating.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F11

Drainage fault - The display shows fault code 'F11 (Drainage)'

Issue:

Drainage fault. Water not draining away. Filter combination in the cabinet is blocked. A foreign body (e.g. a cherry stone or a small shard of glass) could be blocking the drain pump. Drain hose kinked. Drain hose or the on-site drainage system is blocked.

Advice:

Clean filter combination as per Operating Instructions. Remove the foreign object. Consult the Operating Instructions for further information. Straighten hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose. After prolonged use, there may be a build-up of deposits in the drain hose or in the on-site drainage system including the 'U' bend. Check the drain hose and the on-site drainage for blockages and clean as necessary. If this is not possible, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F12

Water intake fault at start of step

Issue:

Water intake fault at start of step. Stopcock is closed. Water inlet filter is clogged. Inlet hose is kinked. Supply flow pressure is lower than 30 kPa (0.3 bar).

Advice:

Turn on the water supply at the stopcock. Clean water inlet filter in accordance with the 'cleaning and care' in the Operating Instructions. Make sure there are are no sharp kinks or loops in the inlet hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F13

Water intake fault: Heater pressure switch

Issue:

Water intake fault: Heater pressure switch. Water intake fault at end of step.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F14

Water intake fault: Heater pressure switch

Issue:

Water intake fault - Level switch - Heating.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F15

Water intake fault: Hot water

Issue:

Water intake fault: Hot water

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F18

Flow meter stationary state monitor B3/4

Issue:

Flow meter stationary state monitor B3/4. Flow meter stationary.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F19

Flow meter B3/4 stiff and not turning freely

Issue:

Flow meter B3/4 stiff and not turning freely. Flow meter slow / difficult to rotate.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F24

Heater relay contact

Issue:

Heater relay contact

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F25

Desired temperature fault

Issue:

Desired temperature fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F26

Boiling protection

Issue:

Boiling protection

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F32

Error message F32 appears in display and door is not closed automatically

Issue:

Appliance has automatic door-closing feature. The fault may occasionally occur if the door is manually closed too fast.

Advice:

Please switch the appliance off from the mains supply for 10 seconds. If the fault persists, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F33

Door lock does not open

Issue:

Door lock does not open

Advice:

Please switch the appliance off from the mains supply for 10 seconds. If the fault persists, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

F36

Door switch defect

Issue:

Door switch defect

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F40

Electronic fault

Issue:

Electronic fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F42

Line frequency registration fault

Issue:

Line frequency registration fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F47

Mains frequency registration fault

Issue:

Mains frequency registration fault. BAE/ SLT interface defective.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F51

Heater pressure switch

Issue:

Heater pressure switch. Level switch, pressure sensor.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F52

Heater pressure switch has reset during heating

Issue:

The display shows the fault code 'F52'. Heater pressure switch has reset during heating. A sensor has detected excess foam in the cabinet. The programme is interrupted.

Advice:

• To cancel the fault indication, turn the selector switch to Stop/Finish or, with light-touch buttons, press the Start/Stop button for at least 1 second until the start/stop LED flashes.
• Switch the appliance off and then back on again.
• If using detergent tablets that also contain rinse aid, the 'Combi Tablet' function, if available, should be set. Do not use detergent tablets with the Quick wash 40°C programme.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F53

Speed sensor fault

Issue:

Speed sensor fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F63

Slide shutter fault

Issue:

Slide shutter fault. Water path control unit fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F67

Circulation pump speed to slow

Issue:

Circulation pump speed to slow

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F68

Circulation pump operation after switch off

Issue:

Circulation pump operation after switch off

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F69

Circulation pump blocked

Issue:

Circulation pump blocked

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F70

Float switch fault

Issue:

The display shows the fault code 'F70 WaterProof system'. Float switch fault. The Waterproof system has been activated.

Advice:

Turn off the stopcock. We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F78

Vacant

Issue:

Vacant

Advice:

...

F79

Vacant

Issue:

Vacant

Advice:

...

F84

Slide shutter positioning fault

Issue:

Slide shutter positioning fault. Water path control unit position at intake.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F85

Slide shutter signal change fault

Issue:

Slide shutter signal change fault. Water path control unit permanent signal change.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F86

Salt container lid contact fault

Issue:

Salt container lid contact fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F87

Sensor softener fault

Issue:

Sensor softener fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F88

Turbidity sensor fault

Issue:

Turbidity sensor fault

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F91

Load size registration inactive

Issue:

Load size registration inactive

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F102

Communication to smart house bus failure

Issue:

Communication to smart house bus failure

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F103

Smart house bus link incompatibilty

Issue:

Smart house bus link incompatibilty

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F170

Check rinse aid

Issue:

Check rinse aid

Advice:

...

F171

Check salt

Issue:

Check salt

Advice:

...

F172

Repetitive signal change at water path control unit

Issue:

Repetitive signal change at water path control unit

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F173

Minimum pulse check function

Issue:

Minimum pulse check function

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F174

Spray arm sensor - Middle spray arm

Issue:

Spray arm sensor - Middle spray arm

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F175

Spray arm sensor - Bottom spray arm

Issue:

Spray arm sensor - Bottom spray arm

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F176

Spray arm sensor - Top spray arm

Issue:

Spray arm sensor - Top spray arm

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

F177

Filter check

Issue:

Filter check

Advice:

...

F14, F69

Fault code 'F14' or 'F69' appears in the display.

Issue:

Technical fault

Advice:

Please switch the dishwasher off. Wait 10 seconds. Switch the dishwasher back on. Select the wash programme required. Press the Start/Stop button to start the wash programme. If the fault message still appears, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

- - -

Three horizontal bars '- - -' show in the time display at the end of the programme

Issue:

There may be a technical fault.

Advice:

Press 'Start/Stop' for at least 1 second until the Start/Stop LED flashes. All control lamps next to programme buttons light up. Switch the dishwasher off using the 'On/Off' button. After a few seconds: Switch the dishwasher on using the “On/Off” button. Start the programme again. Press the “Start/Stop” button to start the programme. If the three horizontal bars appear again at the end of the programme, there is a technical fault.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

'Middle spray arm blocked' or 'Lower spray arm blocked' appears in display

Issue:

The middle or bottom spray arm is obstructed by an item in the load. The middle and lower spray arm jets are blocked.

Advice:

Rearrange items as appropriate to remove obstruction. Switch the dishwasher off. Remove the spray arms as follows:

• Take out the cutlery tray (if fitted).
• Press the top spray arm upwards to engage the inner ratchet. Then unscrew the spray arm.
• Press the middle spray arm upwards to engage the inner ratchet. Then unscrew the spray arm
• Remove the lower basket.
• Pull the lower spray arm firmly upwards to remove it
• Use a pointed object to press food residue into the spray arm
• Rinse thoroughly under running water.
• Replace the spray arms and check that they rotate freely.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

'Water intake temperature too low' appears in display in 'Without heating' programme

Issue:

The water intake is below the required temperature of 45°C.

Advice:

Restart the programme. Use an alternative programme if the error message reappears.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

'Water intake/Open stopcock' appears in display

Issue:

Stopcock is closed. Water inlet filter is blocked. Inlet hose is kinked. Supply flow pressure is lower than 30 kPa (0.3 bar).

Advice:

Turn on the water supply at the stopcock. Clean the water inlet filter as per Operating Instructions. Make sure there are are no sharp kinks or loops in the inlet hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

Countdown time not shown in display

Issue:

Depending on model.

Advice:

Some models only have a 2-digit display which will only show delay start times. They will not show coundown times.

…

The display is blank

Issue:

Machine stand-by function is active. The display goes blank if no buttons have been pressed for several minutes. Machine 'stand-by in operation' function active. When a programme is running, no countdown time is indicated. On some models the display is only for the delay start function, they do not show the wash time remaining. Models with this are G11xx, G21xx, G41xx and G51xx.

Advice:

Press any button to bring up the display. Press any button to display the countdown time. To display the countdown time permanently, deactivate the 'Stand-by in operation' function as described in the operating instructions.

…

The display is blank, button sounds may be heard (G 6900; G 6905)

Issue:

There is a fault in the software.

Advice:

To be able to operate the appliance disconnect it from the power supply for one minute. Then switch the appliance on again and deactivate either the time display or the BrilliantLight. This will allow you to use the dishwasher as normal. To install an update, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

…

The display shows 'Close salt container cap'.

Issue:

The salt container cap is not closed tightly.

Advice:

Screw the salt container lid on firmly. If the salt container lid has become loose during a programme cycle, the following is also necessary: Switch the dishwasher off and back on again. Start the programme again.

Start/Stop

'The 'End' and 'Start' or the 'Start/Stop' indicator lights are flashing at the end of a programme.

Issue:

This is the standby function. 10 minutes after the programme Finish LED has lit, the appliance switches to standby mode (Finish LED off, Start/Stop LED flashes slowly). This also occurs if a programme has been selected but the Start button has not been activated. There may be a technical fault.

Advice:

Turn the programme selector to the “Stop” position. Switch the dishwasher off using the “On/Off” button. After a few seconds: Switch the dishwasher on using the “On/Off” button. Turn the programme selector to the required programme. Press the 'Start' button. If the indicators flash again, there is a technical fault.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

Water intake

'Water intake' indicator flashes shortly after starting a programme

Issue:

Stopcock is closed. Water inlet filter is blocked. Inlet hose is kinked. Supply flow pressure is lower than 30 kPa (0.3 bar).

Advice:

Turn on the water supply at the stopcock. Clean water inlet filter in accordance with the 'cleaning and care' in the operating instructions. Make sure there are are no sharp kinks or loops in the inlet hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose.
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

Drain

The 'Drain' indicator light is flashing and the programme has stopped.

Issue:

Fault during water intake/drainage. Filter combination in cabinet is clogged. A foreign body could be blocking the drain pump. Drain hose kinked. Drain hose blocked.

Advice:

Clean filter combination as per Operating Instructions. Remove foreign object. Consult Operating Instructions for further information. After prolonged use, there may be a build-up of deposits in the drain hose. Check the hose for blockages and try to remove cause. Straighten the hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose, if this is not possible, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

Inlet/Drain

The indicator light 'Inlet/Drain' is flashing, water possibly still in the cabinet

Issue:

Fault during water intake/drainage. Water intake problem. Supply flow pressure is lower than 30 kPa (0.3 bar). Soiling or blockage in the filter or non-return valve. Drain hose kinked, blocked or over stretched. Miele waterproof system activated.

Advice:

Please ensure the water supply is turned on at the stopcock. Check the water inlet filter and clean as necessary, for further information consult the operating instructions. Make sure there are are no sharp kinks or loops in the inlet hose. Monitor any kinks as these may cause the plastic to become brittle and worn. In the event of damage, replace the inlet hose. Please check the filter combination and clean as necessary, for further information consult the operating instructions. Check for any debris blocking the drain pump or non-return valve, e.g. cherry pips or small shards of glass (BEWARE OF INJURY) and remove and clean as necessary, for further information consult the operating instructions. Please unkink the hose. Monitor any kinks as the plastic may become brittle or worn and cause a leak. Please contact Miele Service if the drain hose is damaged. After prolonged use, there may be a build-up of deposits in the drain hose. Check the hose for blockages and try to remove cause. If this is not possible, please arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London, you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit.

…

Solid rinse aid or salt (PC) indicator light.

Issue:

The 'Salt' indicator light may continue to be lit after replenishing the salt reservoir as it may take a while for the salt to dissolve. Use of Combi X-in-1 tabs

Advice:

The light will go out of its own accord. Miele recommends selecting the 'X-in-1' function. If this function is not available, the indicator will continue to operate as before. This is normal when using combi tabs. For the best drying results, we recommend that you use separate detergent, rinse aid and salt. We recommend adding salt and setting the water hardness to keep the built-in water softener in good working order.

…

The 'Main wash', 'Drying' and 'End' Indicator LEDs flash simultaneously.

Issue:

Technical fault.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

The 'Spray arm' indicator light will flash.

Issue:

Tall items are blocking the path of the middle spray arm. The middle spray arm nozzles are blocked.

Advice:

Interrupt the programme and rearrange items which are obstructing the spray arm.
Switch the dishwasher off before rectifying the fault. Clean the spray arm as follows:

• Press the middle spray arm upwards (1) to engage the inner ratchet. Then unscrew the spray arm (2).
• Use a pointed object to push food particles into the spray arm jets.
• Rinse thoroughly under running water.
• Replace the spray arms and check that they rotate freely.

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.

…

The 'Water inlet' indicator light lights up during the 'Energy save' programme.

Issue:

The intake water has not reached the required temperature of 45°C, the hot water system may be overloaded.

Advice:

Start the programme again. If the indicator light comes on again select a different programme.

…

Water drips out of vent grille

Issue:

There is a fault with the drying fan.

Advice:

We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Miele Dishwasher Repairs in London.