Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Maytag Washing Machine MAH9700 Model Error Codes
These error code explanations can help you diagnose a problem with your Maytag Washing Machine MAH9700 Model.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
dc
Unbalanced load
- Issue:
- Redistribute the load in the washer and run the spin cycle again. If the load still won’t spin, empty the tub and run the spin cycle again. If the washer still won’t spin, check the drive system and suspension components for damage. Replace any defective components.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
E2
Stuck key on the control panel
- Issue:
- Check for a stuck key on the control panel. If the key can’t be freed up, replace the control panel.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
FL
Door failed to lock
- Issue:
- Unplug the washer and check the door lock assembly for damage. Check the wire harness connections on the door lock assembly. If the door lock assembly is damaged, replace it.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
LE
Water level sensor defective
- Issue:
- Unplug the washer and check the wire harness connections on the water level sensor and the electronic control board. Check the air hose connection on the water level sensor. If the wire and hose connections are okay, replace the water level sensor. If the problem persists, replace the electronic control board.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
LO
Door failed to unlock
- Issue:
- Unplug the washer and check the door lock assembly for damage. If the door lock assembly is damaged, replace it. Check the wire harness connections on the door lock assembly.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
nd
Water isn’t draining before the spin cycle begins
- Issue:
- Remove any clog from the house drain for the washer. Remove any clogs or kinks from the washer drain hose. Unplug the washer and check the drain pump, and then replace the drain pump if damaged.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
nF
Washer fills continuously for more than 12 minutes
- Issue:
- Open the water supply valves for the washer fully. Check the water supply pressure and flow through the fill hoses; if the pressure and flow are adequate but the water trickles in during the fill, replace the water inlet valve assembly. Check the drain hose configuration according to the installation guidelines. An improperly installed drain hose can siphon the fill water.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
od
Door hasn’t been opened after 2 complete wash cycles
- Issue:
- If the washer door hasn’t been opened after 2 wash cycles, open and close the door to clear the code. If the door was opened, unplug the washer and check the wire harness connections on the door lock assembly and the electronic control board. If the wiring connections are okay, replace the door lock assembly. If the problem persists, replace the electronic control board.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
OE
Water level overflow error
- Issue:
- The water level sensor detects that water level is above the overflow level. If the washer is overfilled, a water inlet valve might be stuck open. Replace the water inlet valve assembly if defective. If the washer isn’t overfilling, replace the water level sensor. If the problem persists, replace the electronic control board.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Maytag Washing Machine Repairs in London.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.