Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Frigidaire Range/Stove/Oven Fault Codes Version 1 Error codes
These error code explanations can help you diagnose a problem with your Frigidaire Range/Stove/Oven Fault Codes Version 1.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
F2
Oven temp is above design specifications
- Issue:
- Oven temp is above design specifications
- Advice:
- Oven temp has risen above 665F and door unlocked or above 965F with door locked. Check oven temperature sensor.
F3
The oven temperature sensor is open
- Issue:
- The oven temperature sensor is open
- Advice:
- Check for open wire connection between EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Replace sensor if no wiring problem.
F4
The oven temperature sensor is shorted
- Issue:
- The oven temperature sensor is shorted
- Advice:
- Check for shorted wire and/or connections between the EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Replace sensor if no wiring problem.
F5
The watchdog is active when it should be off
- Issue:
- The watchdog is active when it should be off
- Advice:
- Microprocessor checking the operation of the EDC relay, after selection of bake, broil, or clean operation. Relay failed this check.
F6
No 60 Hz time base
- Issue:
- No 60 Hz time base
- Advice:
- 60 Hz time base is required for time controlled cycling. Replace EDC.
F7
Lock motor relay watchdog circuit is active when it should be off
- Issue:
- Lock motor relay watchdog circuit is active when it should be off
- Advice:
- Microprocessor checking the operation of the EDC lock, relay failed. Replace EDC.
F8
Lock motor relay watchdog is active when it should be off
- Issue:
- Lock motor relay watchdog is active when it should be off
- Advice:
- Microprocessor checking the operation of the EDC lock relay after self clean is selected, relay failed. Replace EDC.
Arrange a visit from an Appliance engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.