Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
Beko Dishwasher Error codes
These error code explanations can help you diagnose a problem with your Beko Dishwasher.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
H2
Dishwasher turbidity sensor error
- Issue:
- The turbidity sensor is the sensor in the sump that detects the presence of deterrgent.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
H3
Dishwasher diverter valve position error
- Issue:
- The diverter valve is the valve that controls the water flow to the either the top or bottom spray arms or to both at the same time.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
H4
NTC Error
- Issue:
- The dishwasher cannot read the temperature sensor.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
H5
Uninterruptable water inlet error
- Issue:
- The electronic controller of the dishwasher monitors the water counter pulses during every step of the wash program. If the pulses received from the counter at any stage except when the dishwasher is supposed to be filling, and if the received pulses exceed 0.6 lt. of water then this error will be displayed. When the fault detected, software drives the drain pump with 1 minute intervals (1 min ON, 1 min. OFF). During this interval if counter pulses stop (the dishwasher ceases to fill) then program will continue. Malfunction of Water-Inlet Valve (stuck as open). Malfunction of T7 triac on the electronic board
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
H6
Water inlet fault
- Issue:
- No water is detected to teh dishwasher or, it fails to fill.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
H7
Heating fault
- Issue:
- The dishwasher canot detect the heater or reach the correct temperature.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Beko Dishwasher Repairs in London.
Arrange a visit from a Dishwasher engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.