Domestic Appliance Forum

I have Indesit IDS105UK slimline dishwasher....the following fault has occurred.

1. On start up machine pumps out water then allows water into machine after about 2 mins water pumps out and green led lights 1 and 3 flash.

2. Have thought cleaned all pipework checked and cleaned pump....all filters and hoses inside machine.

3. The turbo unit seems to have a build up of scale so cleaned out with soda crystals.

4. Have checked to anti flood device and that is working.

Machine worked first time after cleaning but subsequently has developed the fault again. If you re start the machine several afters after the fault lights flashing it eventually works but does not seem to be working through the cycle.

I have tried several forums but none seem to show lights 1&3 flashing as the error code.

Machine is well maintained and am reluctant to buy a new one unless I know that this one is beyond economical repair.

Any suggestions would be welcome.

Many thanks