Fisher & Paykel Active Smart Stage 1,2, & 3 Fault Codes

Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.

Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.

Fisher & Paykel ActiveSmart™ Stage 1,2 and 3 Fault Codes

These error code explanations can help you diagnose a problem with Fisher & Paykel ActiveSmart™ Stage 1, 2 and 3.

Fault 1

FC SENSOR RESISTANCE FAULT

Issue:
The resistance of the FC Sensor is outside the normal range (< 660 ohms).
Advice:
Primary Action: Check sensor connection at controller. Secondary Action: Replace sensor.

Fault 2

EVAP SENSOR RESISTANCE FAULT

Issue:
The resistance of the Evaporator Sensor is outside of the normal range (> 45k ohms).
Advice:
Primary Action: Check sensor connection at controller. Secondary Action: Replace sensor.

Fault 4

PC SENSOR RESISTANCE FAULT

Issue:
The resistance of the PC Sensor is outside of the normal range (> 45k ohms).
Advice:
Primary Action: Check sensor connection at controller. Secondary Action: Replace sensor.

Fault 5

PC SENSOR RESISTANCE FAULT

Issue:
The resistance of the PC Sensor is outside of the normal range (< 660 ohms).
Advice:
Primary Action: Check sensor connection at controller. Secondary Action: Replace sensor.

Fault 6

DEFROST FAULT

Issue:
The previous 2 defrosts were aborted after 60 minutes.
Advice:
Primary Action: Check the defrost heater assembly in the FC - look for blown fuses, loose/bad connections. Secondary Action: Check the 14 way harness for damage at the unit compartment end. Tertiary Action: Replace Power Module.

Fault 7

Stage 1,2,3 NO FAULT

Issue:
If this LED is flashing the cabinat is either a stage 4 cabinet or the cabinet is not displaying fault.
Advice:
We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price Fisher & Paykel Fridge Freezer Repairs in London.

Arrange a visit from an Appliance engineer

If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.

Book online or give us a call on 0208 226 3633

London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )

Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.

Additional Info

  • Product Types: Fridge Freezer
Read 2303 times