Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe. There are also some help, tips and hints with a lot of the fault codes published here that you usually will not find anywhere else and, as we learn, we add more information so if you can't find what you need please ask in the forums.
Before using this section please understand that fault or error codes are used as a diagnostic aid, they are not a replacement for diagnostic skill on the part of the person repairing the product and are not in any way usually going to point to the precise component that is faulty. All they do is give you an idea of where to start looking for the fault.
AEG-Electrolux Favorit 80800 ECO- Dishwasher Fault Codes
These error code explanations can help you diagnose a problem with your AEG-Electrolux Favorit 80800 ECO- Dishwasher.
North London Appliances Repair forums
We add more information as we learn so if you can't find what you need please ask in the Repair forums.
C0
Communication Error
- LEDs:
- Washing
- Audible Alarm:
- —–
- Display:
- —–
- Description:
- When no data can be received between input module and main PCB after 10 attempts
- Symptom:
- Program is stopped until communications are restored
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C1
Water tap
- LEDs:
- End
- Audible Alarm:
- Once
- Display:
- LED water
- Description:
- Pressure switch level is not reached within 60 sec.
- Symptom:
- Selected program LED flashes. Program is stopped. Can be re-started by pressing program button. Acoustic signal is interrupted by opening the door.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C2
Drain pump
- LEDs:
- Drying
- Audible Alarm:
- Twice
- Display:
- —–
- Description:
- If reset point of pressure Switch is not reached within 120 sec, cycle will stop
- Symptom:
- Program LED flashes program is stopped and can continue by pressing the program button. Acoustic signal is interrupted by the door .
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C3
Aqua control (float switch)
- LEDs:
- Drying End
- Audible Alarm:
- 3 times
- Display:
- —–
- Description:
- Drain pump is working although it is not selected by PCB
- Symptom:
- Program stops and restarts automatically once the fault is rectified. Acoustic signal is interrupted by opening the door.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C4
—–
- LEDs:
- Final rinse
- Audible Alarm:
- —–
- Display:
- —–
- Description:
- —–
- Symptom:
- Advice:
- —–
C5
Turbidity sensor
- LEDs:
- Final rinse end
- Audible Alarm:
- 5 times
- Display:
- —–
- Description:
- Turbidity signal can not re-calibrate
- Symptom:
- Turbidity detected. cycle run is adapted accordingly.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C6
—–
- LEDs:
- Final rinse drying
- Audible Alarm:
- —–
- Display:
- —–
- Description:
- —–
- Symptom:
- Advice:
- —–
C7
Heating
- LEDs:
- Final rinse drying End
- Audible Alarm:
- 7 times
- Display:
- —–
- Description:
- During heating temp has not increased by 1.5 ºC within 3 mins.
- Symptom:
- Cycle will continue to the end without the heating step.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C8
NTC sensor
- LEDs:
- Rinsing
- Audible Alarm:
- 8 times
- Display:
- —–
- Description:
- NTC short circuit
- Symptom:
- Cycle will continue to the end without the heating step.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
C9
Tacho
- LEDs:
- Rinsing End
- Audible Alarm:
- Display:
- —–
- Description:
- With circulation pump running no tacho signal is received by PCB for 2 sec.
- Symptom:
- Circulation pump driven without control. No heating will take place. This function will be controlled in every step.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
CA
Circulation Pump
- LEDs:
- Rinsing Drying
- Audible Alarm:
- 10 times
- Display:
- —–
- Description:
- Tacho signals are detected but the circulation pump should not be running
- Symptom:
- Cycle will stop, water continues until the pressure switch is made
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
Cb
Diverter valve
- LEDs:
- Rinsing Drying End
- Audible Alarm:
- 11 times
- Display:
- —–
- Description:
- (a)Diverter valve not in required position within 4.3 minuets. (b)Diverter valve changes position without selection from the PCB.
- Symptom:
- Cycle continues. Heating steps will be eliminated.
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
Cf
Program Error with Forming variant
- LEDs:
- Washing End
- Audible Alarm:
- 15 times
- Display:
- —–
- Description:
- Fault within the electronics.
- Symptom:
- No program selection possible On/Off-LED
- Advice:
- We add more information as we learn so if you can't find what you need please ask in the Repair forums. Alternatively you can book a repair online or call us on 0208 226 3633 to arrange an engineer visit. We offer fixed price AEG Dishwasher Repairs in London.
—–
Fault I/O variant (input/Output)
- LEDs:
- —–
- Audible Alarm:
- —–
- Display:
- —–
- Description:
- Wrong I/O variant program I/O component does not match the control component.
- Symptom:
- No program selection possible On/Off-LED
- Advice:
- —–
The Control Panel
On the left of the control panel are the ON/OFF and Program selection buttons.
These buttons are also used to perform certain functions:
- Adjusting the water softener setting
- Adding or deleting an audible signal to indicate that a wash program has finished.
- Starting the Test program
- Running the individual component check
- Showing the fault code in the memory
- Cancelling of the fault codes in the memory
To the right of the door handle is the multi-display which shows:
- The run time of the selected program
- The setting of the water softener
- If the end of program tone is on or off
- The length of time set for the program delay start
- Fault codes
Above the multi-display is the button for setting the program start delay.
To the right of the multi-display are the program phase indicators. When a program is first selected all the phase indicators are illuminated. Once the pro-gram starts only the current program step will be indicated by the corresponding lamp.
To the left of the control panel are the warning lamps which will tell the customer:
- Refill up the Salt
- Refill the Rinse aid
- The Water is not entering the machine (Tap?)
- Clean the Filter
- The Door is open
- The middle spray arm is not rotating
TO CLEAR THE FAULT CODE:
The fault code will clear automatically when the dishwasher is turned off.( but will re-appear if the fault is not repaired)
Display and cancellation of fault code memory
To display fault codes in the memory:
- Press and hold Auto 65 and Normal 65 program buttons.
- Switch the machine on with the ON/OFF button.
- The LEDs flash for the Auto 65 and the Normal 65 programs.
- Push the Intensive 70 button.
- The fault code will be displayed.
To cancel fault code in the memory:
- Press and hold Auto 65 and Normal 65 program buttons.
- Switch the machine on with the ON/OFF button.
- The LEDs flash for the Auto 65 and the Normal 65 programs.
- Press the Auto 65 program button.
- The fault codes will be deleted.
Arrange a visit from a Dishwasher engineer
If you do need an engineer to visit your home, help is at hand. We’ll arrange for an engineer near you to call in and fix your appliance, at a time that’s suitable for you.
Book online or give us a call on 0208 226 3633
London Only - Coverage Area | ( Monday - Friday: 8:00 - 20:00 / Saturday: 09:00 - 18:00 )
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. Please, read our disclaimer before proceeding.