Domestic Appliance Forum
Hi
I have a problem with a Blomberg TKF 8451 AG50 tumble dryer not heating. Its heat pump type machine.
I have run the test program when I get to this part of the test below. I cannot go any further as the value is only between 50-110 with an average of approx. 70
"xxx" appears on the display. This is the open circuit ADC value.
Check the sensor if the sensor are open circuit. It cannot be passed to the next steps till the sensors are open circuit. When the sensor value reaches to 250ADC, it means open circuit and "Ohn" appears on the display. When the ADC value reaches to 250, it means sensor is open circuit and you can pass the next steps
Can anyone help with what I should do next please
I have a problem with a Blomberg TKF 8451 AG50 tumble dryer not heating. Its heat pump type machine.
I have run the test program when I get to this part of the test below. I cannot go any further as the value is only between 50-110 with an average of approx. 70
"xxx" appears on the display. This is the open circuit ADC value.
Check the sensor if the sensor are open circuit. It cannot be passed to the next steps till the sensors are open circuit. When the sensor value reaches to 250ADC, it means open circuit and "Ohn" appears on the display. When the ADC value reaches to 250, it means sensor is open circuit and you can pass the next steps
Can anyone help with what I should do next please
There are no replies made for this post yet.