Monday, 22 March 2021
  3 Replies
  2K Visits
0
Votes
Undo
  Subscribe
Hi!
I have a Miele TDD130WP Condenser Tumble Dryer. 3 years old. Was working perfectly until I opened the door, then error code F036 came up.
I've tried powering it off and leaving unplugged overnight, but the fault returns immediately the power returns and the dryer cannot be used.
Can anyone help?
Many thanks!
Rate this post:
3 years ago
·
#2388
0
Votes
Undo
Hi
Did you fix the fault as have the same problem and cannot find a solution.
3 years ago
·
#2389
0
Votes
Undo
Yes - a simple fix really.
The door lock was faulty, which I had already replaced. F36 remained in the error log and the machine would not work until it was reset via service mode and tested, Appliance now working to spec.
Buy a new door lock - cost about £50, depending on model.
Easily removed and new one fitted with 2 simple screws.
Follow Miele instructions to go into Service Mode, Clear the Errors, Power off...back on again and machine works perfectly.
Had no issues every since.
3 years ago
·
#2398
0
Votes
Undo
good evening because i have the same device and it displays the same fault code you could share it service mode.thanks
  • Page :
  • 1
There are no replies made for this post yet.
Submit Your Response
Upload files or images for this discussion by clicking on the upload button below.
Supported: gif,jpg,png,jpeg
· Insert · Remove
  Upload Files (Maximum 2MB)
Captcha
To protect the site from bots and unauthorized scripts, we require that you enter the captcha codes below before posting your question.