Domestic Appliance Forum
Accepted Answer
The LG refrigerator Er FR error code on the refrigerator’s display mainly indicates an abnormality with the refrigerator’s fan motor. This can be caused by a faulty refrigerator fan motor, wiring issue, or a faulty control board (PCB).
Troubleshooting Your LG Refrigerator With ER FR Error Displayed:
– Reset the refrigerator (unplug fridge for 10 minutes)
– Input unit to test 1 mode on PCB board (press button one time)
– Open freezer door and check air flow
– If no airflow, check fan motor for rust or ice (replace if rusty, iced up, or not easy to turn)
– If there is airflow, check the fan motor voltage from board
Troubleshooting Your LG Refrigerator With ER FR Error Displayed:
– Reset the refrigerator (unplug fridge for 10 minutes)
– Input unit to test 1 mode on PCB board (press button one time)
– Open freezer door and check air flow
– If no airflow, check fan motor for rust or ice (replace if rusty, iced up, or not easy to turn)
– If there is airflow, check the fan motor voltage from board
Accepted Answer
The LG refrigerator Er FR error code on the refrigerator’s display mainly indicates an abnormality with the refrigerator’s fan motor. This can be caused by a faulty refrigerator fan motor, wiring issue, or a faulty control board (PCB).
Troubleshooting Your LG Refrigerator With ER FR Error Displayed:
– Reset the refrigerator (unplug fridge for 10 minutes)
– Input unit to test 1 mode on PCB board (press button one time)
– Open freezer door and check air flow
– If no airflow, check fan motor for rust or ice (replace if rusty, iced up, or not easy to turn)
– If there is airflow, check the fan motor voltage from board
Troubleshooting Your LG Refrigerator With ER FR Error Displayed:
– Reset the refrigerator (unplug fridge for 10 minutes)
– Input unit to test 1 mode on PCB board (press button one time)
– Open freezer door and check air flow
– If no airflow, check fan motor for rust or ice (replace if rusty, iced up, or not easy to turn)
– If there is airflow, check the fan motor voltage from board
There are no replies made for this post yet.