Lamona Hob Errors
ER03 and permanent tone
Fault Description: Continuous button actuation; control switches off after 10 seconds
Action: Clean the user interface.
E2
Fault Description: Over temperature
Action: Allow system to cool
E3
Fault Description: 1. Pot/pan not suitable, example Loss of magnetic properties because of temperature at bottom of pot. 2. Power of cooking zones permanently exceeded
Action: 1. This error is reset after 30 seconds; the cooking zone can be used again. The pot/pan must be removed if the fault keeps reoccurring. 2. The power unit must be replaced if the error continues to be displayed even when no pot/pan is present on the cooking zone.
E/H
Fault Description: Invariable resistor fault
Action: Induction module must be cool
ER03 and permanent tone
Fault Description: Continuous button actuation; control switches off after 10 seconds
Action: Clean the user interface.
E2
Fault Description: Over temperature
Action: Allow system to cool
E3
Fault Description: 1. Pot/pan not suitable, example Loss of magnetic properties because of temperature at bottom of pot. 2. Power of cooking zones permanently exceeded
Action: 1. This error is reset after 30 seconds; the cooking zone can be used again. The pot/pan must be removed if the fault keeps reoccurring. 2. The power unit must be replaced if the error continues to be displayed even when no pot/pan is present on the cooking zone.
E/H
Fault Description: Invariable resistor fault
Action: Induction module must be cool